• Super tension braiding technology (STBT) has raised the benchmark 3.5 times because of the resilience in an application where there is a lot of flex. Raised the benchmark 350% Greater flexibility.
• Super Tension Braiding Technology (“STBT”) with an impregnated rubber outer.
• ISO 1436-1 EN853
• Application: For high pressure air, oil & water in general industry, agriculture, dairy and the pressure washing and food production industry
• Scuff resistant synthetic rubber outer ensures hard wearing, longer lasting and reduces chance of contamination. Resistant to oil, abrasion, ozone & weather resistant.
• REACH approved synthetic rubber inner core – meets fluid contamination regulations.  Resistant to hot water, detergent, and oil
• STBTTM is a method of hose braiding when it is manufactured to ensure the strength of the hose is probably greater than all the hoses currently available on the European Hose Market. At the same time, STBTTM delivers an outstanding flexibility in both R1 (1 wire) and R2 (2 wire) braided V-TUF WashFlex jet wash hose. Ensure your hose has the STBTTM rating, for longer lasting results, greater flexibility, less cumbersome hose, and lighter in weight.

V-TUF WASHFLEX High Pressure Jet Wash Hose (price per meter) - Please state what length you require and the hose ends need swaging on with the correct equipment.
V-TUF WASHFLEX is known for being resistance to wear, with comfortable flexibility.

• Hose Colour: BLUE
• Hose Type: Solid Wear Resistant Rubber (Wrapped Pattern)
• Hose Braiding: 1 wire (R1)
• Internal Hose Diameter: 3/8" / 9.5mm / DN10
• External Hose Diameter: 17.4mm
• Sold in lengths up to 100m
• Temperature Range: -40oC to +155oC / -40oF to +311oF
• Max. Working Pressure: 250 Bar / 3675 psi
• Min. Burst Pressure: 820 Bar / 12054 psi
  This figure (Burst Pressure Rating), is to show you the test results. Do not use the hose in an application that goes above the Maximum Working Pressure shown above!
• Swage dimension: 20mm on a skived end (Please note: Due to general market inconsistencies, please double check this with a ‘go-no go’ gauge to ensure the hose end is safely swaged on)

V-TUF WASHFLEX Confidence!

We can confidently say that V-TUF WASHFLEX is a premium product because…...

• We have had a near 100% success rate on V-TUF WASHFLEX – No bursting, pin holes or outer casing falling off. Consistent bore and outside diameter throughout hose lengths.
• The outer rubber casing is thoroughly bonded into the braiding – Prevents delaminating of the external cover. Hoses have been tested and have exceeded the required legislation.
• All hose assemblies embrace ‘Ferrule-Fuse’ technology.
• V-TUF Washflex Hose Solutions include loose hose, Bespoke assemblies, Bespoke branding options, Bespoke stock & release programs.
• A range of colours available – Stand out as different from your competition.
• This gives our dealers and consumers 'peace-of-mind'.