V-TUF tufSCRUB 43cm 240V Floor Polisher - with Floor Brush, Without tank

V-TUF tufSCRUB OT45 43cm 240V Floor Polisher with Floor Brush Without Tank (TUFSCRUB-OT45240) is a professional 240V floor polisher with 43cm cleaning head and floor brush, without a water tank — for dry buffing and polishing applications.

For: Facilities managers, cleaning contractors, and professional floor care operators requiring a 240V floor polisher for buffing and polishing on dry surfaces.

Key specifications:

• Voltage: 240V
• Cleaning width: 43cm
• Drive: Belt drive
• Chassis: Stainless steel
• Tank: No (dry applications)

What's included:

• tufSCRUB OT45 240V machine with floor brush

Important: Without tank — dry applications only. With dual speed and tank: TUFSCRUB-OT45240DS. 110V version: TUFSCRUB-OT45110.

Where this machine is used

The 240V OT45 is for professional buffing, polishing and dry floor maintenance on standard 240V mains — facilities and contract cleaning across retail, hospitality, offices, education and healthcare — for polishing and burnishing hard floors.

Legislation that applies

As mains-powered floor-care work equipment, this machine is used in workplaces covered by UK health and safety law. The regulations most likely to apply are:

• Electricity at Work Regulations 1989 — supplied for standard 240V mains operation; the lead, plug and machine should be maintained and PAT-tested as part of your electrical safety regime.
• PUWER (Provision and Use of Work Equipment Regulations 1998) — the machine must be suitable for the task, kept maintained in efficient working order, and used only by trained operators; rotary floor machines need particular care over control and start-up torque.
• COSHH (Control of Substances Hazardous to Health Regulations 2002) — any strippers, polishes or cleaning chemicals used with the machine must be risk-assessed and handled in line with their safety data sheets.
• Manual Handling Operations Regulations 1992 — relevant when transporting, lifting or positioning the machine; assess and reduce handling risks.
• Noise at Work Regulations 2005 — consider operator noise exposure during prolonged use, particularly at higher speeds.

At end of life, dispose of the machine responsibly under the WEEE Regulations. This is general guidance only, not legal advice — responsibility for compliance rests with the employer or operator.

Further reading

• HSE — Electrical safety and portable appliance testing
• HSE — Provision and Use of Work Equipment Regulations (PUWER)
• HSE — Control of Substances Hazardous to Health (COSHH)
• HSE — Manual handling at work
• tufSCRUB spare parts & accessories

Support: See the tufSCRUB Spare Parts page, or call our Lincoln service team on 01522 787978.

1-year manufacturer's warranty. Genuine V-TUF, supplied from our Lincoln warehouse.