V-TUF tufSCRUB OT45 430mm 240V Floor Polisher Dual Speed 180/400 rpm - 15L Tank

V-TUF tufSCRUB OT45 430mm 240V Floor Polisher Dual Speed 180/400 RPM with 15L Tank (TUFSCRUB-OT45240DS) is a professional 240V dual-speed floor polisher with a 430mm cleaning head and 15-litre solution tank. The two speed settings (180/400 RPM) cover both scrubbing and high-speed buffing applications.

For: Facilities managers and professional floor care operators requiring a dual-speed 240V floor polisher with tank for both scrubbing and buffing.

Key specifications:

• Voltage: 240V
• Cleaning width: 430mm
• Speeds: 180 RPM (scrub) and 400 RPM (buff)
• Tank: 15 litres

What's included:

• tufSCRUB OT45 240V dual speed machine with 15L tank
• Floor brush

Important: Without tank, single speed: TUFSCRUB-OT45240. 110V version: TUFSCRUB-OT45110.

Where this machine is used

The dual-speed OT45 covers both floor preparation and finishing on 240V mains — the low speed (180 rpm) with the 15-litre tank scrubs and strips, while the high speed (400 rpm) buffs and polishes — suited to contract cleaners and facilities teams handling mixed hard-floor tasks.

Legislation that applies

As mains-powered floor-care work equipment, this machine is used in workplaces covered by UK health and safety law. The regulations most likely to apply are:

• Electricity at Work Regulations 1989 — supplied for standard 240V mains operation; the lead, plug and machine should be maintained and PAT-tested as part of your electrical safety regime.
• PUWER (Provision and Use of Work Equipment Regulations 1998) — the machine must be suitable for the task, kept maintained in efficient working order, and used only by trained operators; rotary floor machines need particular care over control and start-up torque.
• COSHH (Control of Substances Hazardous to Health Regulations 2002) — any strippers, polishes or cleaning chemicals used with the machine must be risk-assessed and handled in line with their safety data sheets.
• Manual Handling Operations Regulations 1992 — relevant when transporting, lifting or positioning the machine and filling or emptying the tank; assess and reduce handling risks.
• Noise at Work Regulations 2005 — consider operator noise exposure during prolonged use, particularly at the higher (400 rpm) speed.

At end of life, dispose of the machine responsibly under the WEEE Regulations. This is general guidance only, not legal advice — responsibility for compliance rests with the employer or operator.

Further reading

• HSE — Electrical safety and portable appliance testing
• HSE — Provision and Use of Work Equipment Regulations (PUWER)
• HSE — Control of Substances Hazardous to Health (COSHH)
• HSE — Manual handling at work
• tufSCRUB spare parts & accessories

Support: See the tufSCRUB Spare Parts page, or call our Lincoln service team on 01522 787978.

1-year manufacturer's warranty. Genuine V-TUF, supplied from our Lincoln warehouse.