V-TUF Zylock PL041 White Pipe Sealer is an Instant Low Pressure sealant for fine and coarse threads up to 3” in diameter. This product gives and instant seal but has a slow cure to allow for elbows, joints etc. to be realigned after assembly.
V-TUF PL041 is unusual in that it does not fully cure until some 60 hours after application, allowing re-alignment of elbows and joints. Once set, you can guarantee a satisfactory reliable lasting seal. Gives an instant seal but has a slow cure to allow for elbows, joints etc. to be realigned after assembly. Assists with lubrication during assembly of parts.
Ideal for: sealing any gas, chemical, water or steam pipes with coarse threads up to 3 inches.
Method of Use
This solution is ready for use. Simply take the wrapping off, and pull the lid off. Then tilt the bottle downwards, and gently press the dispenser at the top of the bottle, and you should begin to see the white liquid; the professional Zylock Pipe Sealant is ready for use.
- Replaces tapes and dopes
- Stops gas and fluid leaks
- Assists in lubricating during assembly
- Will not shred/tear so no contaminating systems
- For Sealing Gas Pipes
- For Sealing Chemical Pipes
- For Sealing Water Pipes
- For Sealing Steam Pipes
- For any pipes with coarse threads
- For General Plumbing Use
Physical Properties (liquid product)
- Colour: White
- Viscosity 45000-58000cps
- Specific Gravity 1.05
- Max. gap filling: 0.4mm
- Temp Range: -55°C up to 150°C
Physical Properties (cured product) @23°C
- Initial strength: 12-24 minutes
- Final strength: 60 hours
- Breakaway Strength (TBA): Up to 6 N.m
- Prevailing Strength (TP): Up to 2 N.m