V-TUF ATX2000 — Troubleshooting
ATX2000 SUPPORT
V-TUF ATX2000 — Troubleshooting
45L M-Class ATEX Zone 22 dust extractor. Pick the symptom you are seeing for the likely cause and a safe fix.
ATEX Zone 22 machine. Always switch off and isolate the supply before checking anything. Never run the machine in a classified explosive-dust area with a damaged filter or a broken antistatic/earth path.
What’s going wrong?
5 things to check before anything else
1. Container & bagContainer emptied and an ATX101 antistatic bag fitted for fine dust.
2. FilterDaisy filter (ATX170) clean, dry, undamaged and seated on its ring.
3. Hose & inletAntistatic hose clear, connected and the inlet seal airtight.
4. PowerCable undamaged; on 110V, a correctly rated site transformer.
5. Earth continuityAntistatic path intact — essential before any use in an ATEX Zone 22 area.
Still stuck? Call our Lincoln service team on 01522 787978 or email enquiries@v-tuf.com.
Need parts? ATX2000 spare parts →
Need parts? ATX2000 spare parts →